On Target In Fiscal Q4
There are always plenty of moving parts within Pall's results, as the company sells into so many different end markets, but the end result performance was pretty much on target.
Revenue fell almost 1% as reported to close the fiscal year, but revenue in local currency terms rose half a point. Life sciences was up 6% for the quarter, as strength in biopharma offset weaker conditions in the Chinese and European food and beverage sector. Customer utilization levels in industrial markets remain a real issue, though, and the company saw a 5% decline (local currency) in industrial sales, with particular weakness in microelectronics and municipal water.
Hot Logistics Companies To Own For 2015: Mercury General Corporation (MCY)
Mercury General Corporation, together with its subsidiaries, engages in writing personal automobile insurance products. The company also writes homeowners, commercial automobile and property, mechanical breakdown, fire, and umbrella insurance products. Its insurance products cover collision, property damage liability, bodily injury liability, comprehensive, personal injury protection, underinsured and uninsured motorist, and other hazards for automobile policy holders. The company sells its policies through a network of independent agents in California, Florida, Georgia, Illinois, Texas, Oklahoma, New York, New Jersey, Virginia, Pennsylvania, Arizona, Nevada, and Michigan. Mercury General Corporation was founded in 1960 and is headquartered in Los Angeles, California.
Advisors' Opinion:- [By Chuck Carnevale] their website:
��ercury General (NYSE-MCY) is the leading independent broker and agency writer of automobile insurance in California and has been one of the fastest growing automobile insurers in the nation. It is ranked as the third largest private passenger automobile insurer in California, with total assets over $4 billion. Mercury also writes automobile insurance in Arizona, Florida, Georgia, Illinois, Michigan, Nevada, New Jersey, New York, Oklahoma, Pennsylvania, Texas and Virginia. In addition to automobile insurance, Mercury writes other lines of insurance in various states, including mechanical breakdown and homeowners insurance.��/p>
[ Enlarge Image ]
Performance and Dividends Impacted by Operating Stress
It should be clear from the above graphs that the earnings records of these three Dividend Champions have been far from steady, consistent or reliable. Therefore, I cannot get comfortable either recommending them or investing in them because I cannot get comfortable predicting what their future operating results may be. Furthermore, by examining the performance results associated with the above earnings and price-correlated graphs illustrates a lot of uncertainty. A focus on the earnings growth rate column illustrates a lot of stress on each company�� ability to keep their dividend streaks alive (Blue Circles).
[ Enlarge Image ]
[ Enlarge Image ]
[ Enlarge Image ]
The Overvaluation Rejection
Other reasons besides irregular earnings growth that caused a Dividend Champion to be rejected include one of my all-time favorites, valuation. Or to be more precise ��overvaluation. The following example, McCormick & Co. (MKC), represents one of my favorite Dividend Champions based on a very consistent above-average record of earnings growth that produced its impressive dividend streak. The only reason that this Dividend Champion was rejected was because of current overvaluation.
[ Enlarge Imag
- [By John Udovich]
Auto sales are booming and that�� good news for large cap auto insurer�the Progressive Corporation (NYSE: PGR) along with small cap auto insurers Safety Insurance Group, Inc (NASDAQ: SAFT) and�Mercury General Corporation (NYSE: MCY) as they offer income to yield hungry investors as well as income in the form of dividends. Specifically, a Yahoo! Autos blog recently noted that last month, automakers sold 1.5 million new vehicles for the highest rate in years with�most industry forecasters expecting sales to�return to the level they hit before the 2008 recession of 16 million vehicles a year. The blog post then went on to note the three forces driving auto sales:
- [By Fredrik Arnold]
Ten Champion dogs that promised the biggest dividend yields into July included firms representing five of nine market sectors. The top stocks were three of five from the financial sector: Universal Health Realty Trust (UHT); Mercury General Corp. (MCY); Old Republic Int'l (ORI). The other two financial firms, HCP Inc., and United Bankshares Inc. (UBSI), placed sixth and eighth.
Top 5 Life Sciences Stocks To Invest In Right Now: Central Iron Ore Ltd (CIO)
Central Iron Ore, Ltd. is a Canada-based exploration and development company. The Company is engaged in the search for and development of iron ore and gold. Its projects include Yilgarn Iron Ore Project, South Darlot Gold Project and Eureka Gold Project. Advisors' Opinion:- [By Monica Wolfe]
These four insiders made their buys during the public offering for $6 per share, and since their buys the price per share is down about -0.83%.� Highlighted below are the insiders��individual buys:
Timothy Keating (CEO):� Bought 8,000 shares for $48,000.� Now holds 98,000 shares of KIPO stock. Taylor Simonton (D):� Bought 3,000 shares for $18,000. Now holds 13,000 shares of KIPO stock. Kyle Rogers (CIO):� Bought 3,072 shares for $18,432.� Now holds 8,096 shares of company stock. Frederic Schweiger (CFO/COO):� Bought 8,000 shares for $48,000.� Now holds on to 26,700 shares of KIPO stock.
Top 5 Life Sciences Stocks To Invest In Right Now: CommonWealth REIT (CWH)
CommonWealth REIT is a real estate investment trust launched and managed by Reit Management & Research LLC. The fund invests in the real estate markets of the United States. It seeks to invest in office buildings, industrial buildings, and leased industrial land. CommonWealth REIT was founded in 1986 and is domiciled in United States.
Advisors' Opinion:- [By Chris DeMuth Jr.]
So you do not have to wait, here's the punch line…
The recent 2Q 2013 earnings announcement validated the belief that management continues to lay out exactly what they are going to do and then effectively execute on those plans.The current stock price of roughly $4.00 offers a discount to the intrinsic value of the company, which I model to be about $4.80 today, with the potential to be worth between $7.50 and $9.00 per share after cash deployment and the issuance of $100M of new equity capital.The incentive structure for the Gramercy management is very tightly aligned to the common shareholders in contrast to some other REITs, such as CommonWealth REIT (CWH), which is the current poster child for non-alignment.The REIT structure forces management to return cash to shareholders and not hold it to spend on growth projects. Growth capital must be justified to common shareholders every time it is requested.The REIT Legal Requirements Favor Common Shareholders over Company Management
- [By Tess Stynes]
CommonWealth REIT sa(CWH)id Monday that it had invited activist investor Keith Meister of Corvex Management LP to join its board as the company also appointed two independent directors to the board.
- [By Tim Brugger]
In an on-going effort to oust the board of directors of Commonwealth REIT (NYSE: CWH ) , its second largest shareholder, Corvex Management, recently forwarded a record request date to Commonwealth management. The latest request by Corvex follows an earlier consent solicitation proposal in late March. Corvex's ultimate objective of the shareholder meeting is to "remove all of CWH's Trustees without cause," according to a Commonwealth press release issued today.
- [By John Kell var popups = dojo.query(".socialByline .popC"); popups.forEach(func]
Corvex Management LP and Related Fund Management LLC called for an earlier special meeting to replace CommonWealth REIT's(CWH) entire board, with the activist investors criticizing the company’s former board for leaving without engaging in a transition process.
Top 5 Life Sciences Stocks To Invest In Right Now: Commercial Metals Co (CMC)
Commercial Metals Company, incorporated on August 29, 1946, and its subsidiaries manufacture, recycle and market steel and metal products, related materials and services through a network, including steel mini mills, steel fabrication and processing plants, construction-related product warehouses, a copper tube mini mill, metal recycling facilities and marketing and distribution in the United States and in international markets. The Company Americas Division operates utilizing three segments: Americas Recycling, Americas Mills and Americas Fabrication. The Company�� International Division operates utilizing two segments: International Mill and International Marketing and Distribution, which includes all marketing and distribution operations located outside the United States, as well as two United States-based trading and distribution divisions, CMC Cometals, located in Fort Lee, New Jersey and CMC Cometals-Steel, located in Irving, Texas. In October 2013, Commercial Metals Company completed the sale of Howell Metal Company, to Mueller Copper Tube Products, Inc., a subsidiary of Mueller Industries, Inc.
Americas Recycling
The Americas Recycling segment processes scrap metals for use as a raw material by manufacturers of new metal products. This segment operates 33 scrap metal processing facilities with 16 locations in Texas, eight in Florida, two locations in Missouri and one location in each of Arkansas, Georgia, Kansas, Louisiana, North Carolina, Oklahoma and Tennessee. The Company purchases ferrous and nonferrous scrap metals, processed and unprocessed, from a range of sources in a range of forms for its metals recycling plants. Sources of metal for recycling include manufacturing and industrial plants, metal fabrication plants, electric utilities, machine shops, factories, railroads, refineries, shipyards, ordinance depots, demolition businesses, automobile salvage firms and wrecking firms.
The Company's scrap metal recycling plants typically consist of an o! ffice and warehouse building equipped with specialized equipment for processing both ferrous and nonferrous metal located on several acres of land that the Company uses for receiving, sorting, processing and storing metals. Several of the Company's scrap metal recycling plants use a small portion of their site or a nearby location to display and sell metal products that may be reused for their original purpose without further processing. Americas Recycling operates five shredding machines, three in Texas, one in Florida, and one in Oklahoma capable of pulverizing obsolete automobiles or other sources of scrap metal. The Company sells scrap metals to steel mills and foundries , aluminum sheets and ingot manufacturers, brass and bronze ingot makers, copper refineries and mills, secondary lead smelters, specialty steel mills, high temperature alloy manufacturers and other consumers.
Americas Mills
The Americas Mills segment includes the Company's domestic steel mills, including scrap metal shredders and processing facilities that directly support these mills and the domestic copper tube minimill. The Company conducts its Americas Mills operations through a network, which includes five steel mills, commonly referred to as minimills, that produce one or more of reinforcing bar, angles, flats, rounds, small beams, fence-post sections and other shapes; two scrap metal shredders and processing facilities that directly support the steel minimills, and The Company operates five steel minimills, which are located in Texas, Alabama, South Carolina, Arizona and Arkansas.
The Company's Texas minimill manufactures a line of bar size products, including reinforcing bar, angles, rounds, channels, flats, and special sections used primarily in building highways, reinforcing concrete structures and manufacturing. It sells primarily to the construction, service center, energy, petrochemical, and original equipment manufacturing industries. The Company's South Carolina minimill manufac! tures a l! ine of bar size products, which primarily includes steel reinforcing bar. The minimill also manufactures angles, rounds, squares, fence post sections and flats. The South Carolina minimill ships its products to customers located in the Southeast and mid-Atlantic regions, which include the states from Florida through southern New England.
Americas Fabrication
The Americas Fabrication segment consists of the Company's rebar fabrication operations, fence post manufacturing plants and construction-related and other product facilities. The Company conducts its Americas Fabrication operations through a network include steel plants that bend, cut, weld and fabricate steel, primarily reinforcing bar; warehouses that sell or rent products for the installation of concrete; plants that produce steel fence posts, and plants that heat-treat steel to strengthen and provide flexibility. The Company's Americas Fabrication segment operates 49 facilities that the Company considers to be engaged in the various aspects of steel fabrication.
The Company conducts steel fabrication activities in 16 locations in Texas, five each in California and South Carolina, three in Florida, two each in Arkansas, Colorado, Illinois, Louisiana, Mississippi, North Carolina, and Virginia, and one each in Arizona, Georgia, Nevada, New Mexico, Tennessee and Utah. Fabricated steel products are used primarily in the construction of commercial and non-commercial buildings, hospitals, convention centers, industrial plants, power plants, highways, bridges, arenas, stadiums, and dams. Generally, the Company sells fabricated steel in response to a bid solicitation from a construction contractor or the project owner. The Company sells and rent construction related products and equipment to concrete installers and other construction businesses.
The Company has 23 locations in Texas, Louisiana, Mississippi, and Oklahoma, where the Company store and sell these products which, with the exception of a s! mall port! ion of steel products, are purchased from third-party suppliers. The Company operates plants in Chicora, Pennsylvania, Struthers, Ohio and Pell City, Alabama which manufactures armor plate for military vehicles, high strength bar for the truck trailer industry and special bar quality steel for the energy market.
International Mill
The Company's International Mill segment includes the Company's minimill and recycling operations in Poland and its fabrication operations. The Company's subsidiary, CMC Zawiercie S.A. (CMCZ), owns a steel minimill and conducts its operations at Zawiercie, Poland. CMCZ, along with the Company's international recycling and fabrication operations, constitute the International Mill segment. CMCZ operates equipment similar to the Company's domestic steel minimills. The Company operates three rolling mills, one wire-rod mill and two bar mills including a specialty rod finishing mill. In addition, the Company operates a fabrication facility in Dabrowa Gornicza, Poland, that produces welded steel mesh, cold rolled wire rod and cold rolled reinforcing bar.
International Marketing and Distribution
International Marketing and Distribution includes international operations for the sales, distribution and processing of steel products, ferrous and nonferrous metals and other industrial products. In addition, the Company's International Marketing and Distribution segment includes the Company's United States based trading and distribution divisions, CMC Cometals and CMC Cometals Steel. The Company's International Marketing and Distribution business buys and sells primary and secondary metals, fabricated metals, semi-finished, long, flat steel products and other industrial products. The Company sells its products to customers, primarily manufacturers, in the steel, nonferrous metals, metal fabrication, chemical, refractory, construction and transportation businesses. This segment also operates a recycling facility in Singapore.
Advisors' Opinion:- [By Monica Gerson]
Commercial Metals Company (NYSE: CMC) is estimated to report its Q3 earnings at $0.29 per share on revenue of $1.85 billion.
Finish Line (NASDAQ: FINL) is projected to report its Q1 earnings at $0.21 per share on revenue of $394.47 million.
- [By Lauren Pollock]
Commercial Metals Co.'s(CMC) fiscal first-quarter earnings fell 7.6% as the scrap-metal processor’s revenue in several key segments dropped and the top line missed estimates.
- [By Ben Levisohn]
We are downgrading shares of [Commercial Metals (CMC) and�Steel Dynamics] to HOLD from BUY based on valuation and what we see as heightened near-term EPS expectations…
- [By Dividends4Life]
Fair Value: In calculating fair value, I consider the NPV MMA Differential Fair Value along with these four calculations of fair value, see page 2 of the linked PDF for a detailed description:
1. Avg. High Yield Price
2. 20-Year DCF Price
3. Avg. P/E Price
4. Graham Number
NUE is trading at a premium to all four valuations above. The stock is trading at a 85.8% premium to its calculated fair value of $28.51. NUE did not earn any Stars in this section.
Dividend Analytical Data: In this section there are three possible Stars and three key metrics, see page 2 of the linked PDF for a detailed description:
1. Free Cash Flow Payout
2. Debt To Total Capital
3. Key Metrics
4. Dividend Growth Rate
5. Years of Div. Growth
6. Rolling 4-yr Div. > 15%
NUE earned one Star in this section for 2.) above. The stock earned a Star as a result of its most recent Debt to Total Capital being less than 45%. The company has paid a cash dividend to shareholders every year since 1973 and has increased its dividend payments for 40 consecutive years.
Dividend Income vs. MMA: Why would you assume the equity risk and invest in a dividend stock if you could earn a better return in a much less risky money market account (MMA) or Treasury bond? This section compares the earning ability of this stock with a high yield MMA. Two items are considered in this section, see page 2 of the linked PDF for a detailed description:
1. NPV MMA Diff.
2. Years to > MMA
The negative NPV MMA Diff. means that on a NPV basis the dividend earnings from an investment in NUE would be less than a similar amount invested in MMA earning a 20-year average rate of 3.68%. If NUE grows its dividend at 0.7% per year, it will never equal a MMA yielding an estimated 20-year average rate of 3.68%.
Memberships and Peers: NUE is a member of the S&P 500, a Dividend Aristocrat, a member of the Broad Dividend Achievers
No comments:
Post a Comment